SSP Banner 3

Pipe restoration is the rejuvenation of the an old smoking friend. I offer a variety of services to make your briar pipe smoke as good as ever. As the Brigham Production Manager, I became well acquainted with making and repairing not only Brigham's, but all brands of briar pipes. Since the factory in Toronto is no longer accepting repairs, I have acquired some of their original production and repair equipment. You can see my shop page for an idea of what I use to restore pipes a close to original state.
Service Description Price (Canadian Dollars)
Basic Restoration

This is a standard pipe Restoration. In this service I provide:
1. Bowl reaming to remove excess cake;
2. Sterilization of the air channel and shank;
3. Sterilization of the stem air channel;
4. Removal of bowl rim charring;
5. Buffing and polishing stem;
6. Buffing, polishing and waxing bowl.


$12.00
Complete Restoration

This service is to, as much as possible, bring the interior surfaces of the pipe to a near original condition. This is particularly good for pipes purchased as estates. I do this by:
1. Completely sand out and sterilization of the interior of the bowl. Depending on your wishes, buffing to a smooth bare wood or relining will also be done;
2. Drill out air channel from bowl. This means enlarging the air channel;
3. Stem bleaching;
4. Buffing, polishing and waxing.
Basic Restoration is included with this service.


$30.00
Stem Replacement

Stem replacement is a standard pipe repair service. I will attempt to match up your stem with my stock and duplicate the original bend. Basic Restoration is included with this service. 


$22.00
Brigham Aluminum Tenon (Original) Stems



Brigham has, in recent years, moved away from its traditional aluminum tenon. This has been met with mixed reviews and has also led to a diminishing supply for replacement tenons of this ilk. Over the years, Brigham has used a wide number of tenon lengths depending on the style of the pipe. Although I have some of the last available aluminums, they are in limited quantity and are predominantly of a single size. What I do to remedy this shortage is reuse the tenon that came with the original pipe. The tenon is removed from the old stem, completely sterilized and then installed in a new stem.  Pinning is an additional cost. Basic Restoration is included with this service.


$25.00
Brigham Composite Tenon (New) Stems

These stems require less work to replace and the tenons are more readily available. Pinning is an additional cost. Basic Restoration is included with this service.


$22.00
Brigham Grade Pinning

I did not charge for this service in the past but it does take a bit of time and detail work (sometimes includes replacing a whole stem if it chips when inserting or buffing the pins). Therefore, the first pin is free, each additional pin is:


$1.00 Per pin.
Saving Fancy Stems

Pipes have been sent to me requesting a new stem when the tenon has broken off inside the mortise. I do replace the stems on standard shapes because the replacement will not change the original artistic intent of the design. Freehand pipes with special stems are a different story. There is not much chance that I will be able to match the original artistry, so I do what I can to save the original stem. This means putting a new tenon on the stem. So far, I have been pleased with the results. Unusual pipes have been able to retain their character by still incorporating the original stem. It is a fiddly procedure hence the rate. Basic Restoration is included with this service.


$25.00
Restaining

Restaining is available. I will sand the bowl and try to restore the intended character of the pipe. I use four basic stains and blend them to colour match the original staining. Of course, I can stain to the pipe to your preference if you do not like the colour the pipe started with. Be advised, many pipe manufacturers use darker stains or sandblast/rustication to mask flaws. Making a pipe lighter may show flaws that are not currently visible. I will advise you on this prior to performing the sanding. Basic Restoration is included with this service.

$25.00

Restoration and repairs are not restricted to this list. Providing a comprehensive catalog of all possible services is an exercise pipe babble. You know what your pipe's problem is, so contact me with any inquiries.



Current Pipe Restoration Time is Approximately 3 to 4 Weeks. 




Home | About Stefan | Pipe Restoration | Pipes for Sale | Work Shop | Good Places to See | Contact